Advertisement
Quick Links
Advertisement
Related Manuals for Xylem rule 35FA
Summary of Contents for Xylem rule 35FA
- Page 1 Float Switch Instruction Manual...
- Page 2 This unit is designed for use with fresh water and WARNING salt water ONLY. Use with any other hazardous, caustic, corrosive material could result in damage to the pump and the surrounding environment, possible exposure to hazardous substances and injury.
- Page 3 STOP...
- Page 8 2 1 2...
- Page 9 All mounting holes must be sealed with a marine grade sealant to prevent water intrusion. CE Logo When this product carries a CE mark, it conforms to one or more of the following standards: EN 61000-6-1:2001 EN Install to ABYC standards 61000-6-3:2007 Following the Provisions of the Electromagnetic Compatibility...
- Page 10 Testing the Float Switch...
- Page 12 – –...
- Page 13 Always install proper fuse size to prevent damage to product should a short occur. Failure to install proper fuse could increase risk of pump malfunction potentially resulting in personal injury and/or fire hazard. Model Voltage Wire Length Guard Wire Size Max.
- Page 15 30 MAX 5 MAX 2" (5.1cm) 3/4" (2cm)
- Page 17 Disconnect power from the system before working on the unit to avoid personal injury, damage to the surrounding environment and/or damage to the unit. Switch must be mounted equal to or above the pump base for positive shut-off. Keep all wire connections above the highest water level.