Summary of Contents for Xylem McDonnell & Miller SA91-30B
Page 1
INSTRUCTION MANUAL MM 714C Replacement Pump and Burner Switch Arm Contacts with Terminal Panel SA91-30B SA91-30P For installation on 5, 5-M, 7B or 7B-M Terminal Panel Switch Assemblies Electrical Ratings Models with 5 or 5-M Switch Pump and Burner Switch Contact Ratings Voltage Pilot Duty Only 120 VAC...
Page 2
STEP 1 - Removal and Replacement of Contacts and Terminal Panels a. Turn power off to boiler and all controls. Allow boiler to cool to 80˚F (27˚C) and reduce the pressure to 0 psi (0 bar). CAUTION There may be more than one source of power to the boiler.
Page 3
c. Remove and Replace Switch Arm Contacts • Remove two screws (F) and lift off bus bar (G), contact arms (H) and insulator (I). • Place new insulator (I), contact arms (H) and bus bar (G) in position and fasten with two screws (F).