Table of Contents
Advertisement
THE TANK
The inside of the polyethylene tank has a completely smooth surface without any sharp edges. This facilitates
the stirring of the liquid and cleaning.
THE INTAKE FILTER
The intake filter prevents the
impurities
tank
pump from drawing in
or residues inside the
THE PUMP AND THE MOTOR work with battery 12 volt or exp1osion engine (see
instuctions).
ATTENTION: normally the adjustement of the carburator is not necessary since it is already
adjusted when delivered from the factory. In the engine is not working correctly please follow
the following instructions on the adjustable "T" screw:
Turn right to optane a leaner fuel
Turn left to optain a richer fuel
THE SPRAY NOZZLE
and
There are two types of hand-held spray nozzles: one for spraying
one for weed control. The spray nozzle
the
nozzle can
and
is connected to
pump with30-bar PVC piping. The
be opened, closed,
adjusted.
OPERATING THE UNIT
CHECKS AND OPERATIONS TO BE PERFORMED BEFORE STARTING THE UNIT
Start the
switching
electric
1)
motor
on the button for the
version.
As for the engine version make reference to user manual
the
2) Manually open
spray nozzle C.
Proceed with caution when opening the spray nozzle. Be especially careful that there are no other
people near the unit.
3)
the pump will
mounted are
Make sure that the fastening bolts for the surface on which
be
screwed
down tightly.
28
Advertisement
Table of Contents
