Message Display - Panasonic LUMIX DC-GH5L Basic Operating Instructions Manual

Others

Message Display

Confirmation messages or error messages will be displayed on the screen in some cases.
• Please also refer to the "Operating Instructions for advanced features (PDF format)", which
describes more detailed information.
[Some pictures cannot be deleted]/[This picture cannot be deleted]
• This feature can only be used with pictures that comply with the DCF standard.
Perform formatting (P15) on this unit after saving necessary data on a PC, etc.
[Memory Card Error
Format this card?]
• It is a format that cannot be used with this unit.
– Insert a different card.
– Format the card again with the camera after saving necessary data on a PC etc. (P15) Data
will be deleted.
[The lens is not attached properly. Do not push lens release button while lens is
attached.]
• Detach the lens once, and then attach it again without pressing the lens release button. (P13)
Turn this unit on again, and if it is still displaying, contact the dealer.
[Memory Card Error]/[This memory card cannot be used]
• Use a card compatible with this unit. (P9)
[Insert SD card again]/[Try another card]
• An error has occurred accessing the card. Insert the card again.
• Insert a different card.
[Read Error/Write Error
Please check the card]
• It has failed to read or write data. Remove the card after turning this unit off. Insert the card
again, turn this unit on, and try to read or write the data again.
• The card may be broken.
• Insert a different card.
[This battery cannot be used]
• Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic
battery is used, contact the dealer or Panasonic.
• If the battery terminal is dirty, clean it and remove any objects.
[Failed to connect wireless access point]/[Connection failed]/[No destination found]
• The wireless access point information set on this unit is wrong. Check the authentication type,
encryption type, and encryption key.
• Radio waves from other devices may block the connection to a wireless access point. Check
the status of other devices that are connected to the wireless access point as well as the status
of other wireless devices.
110
DVQX1067 (ENG)