Multi Product Power Supply Unit (PSUC) Side Front Adaptor (SFA) IFS extension cable 1.5m (IFS/10) Easyflush 2 | cistermiser.co.uk Have a question? Call our customer support team on 0118 969 1611 Have a question? Call our customer support team on 0118 969 1611 cistermiser.co.uk | 3...
Memory Flush: If a flush is activated while the cistern is refilling, the sensor will remember the flush request and only activate when the cistern is full (to set refill time see page 12). This is indicated by three rising green LEDs. WARNING: Cistern must be level! 4 | cistermiser.co.uk Have a question? Call our customer support team on 0118 969 1611 Have a question? Call our customer support team on 0118 969 1611 cistermiser.co.uk | 5...
Walkaway version only. Minimum distance applies. If x (see diagram) is less than 12cm it is recommended that the Hand Activation is disabled. Refer to section 11. 6 | cistermiser.co.uk Have a question? Call our customer support team on 0118 969 1611 Have a question? Call our customer support team on 0118 969 1611 cistermiser.co.uk | 7...
Isolate supply before sensor lens before use. working on wiring Sensor fixing Mounting options Multiple power connections for Easyflush If installing multiple Cistermiser products, the PSUC Multi Product Power Supply Unit is available as an Sensor Sensor gasket fastening nut accessory. Contact Cistermiser for more details. Side/front adaptor Multi product power supply unit...
Sensor LED Glossary Full flush via Wave or Scratched lens/blocked sensor Walkaway - 2 green LEDs - 3 red LEDs single flash once single flash once per second per second Servo motor obstruction Part Flush via Wave or (Call Cistermiser for advice) - Walkaway - 1 green 2 red LEDs single flash once single flash once per second per second Memory flush/refilling Faulty wiring - 2 red LEDs Alternating, 3 green LEDs single flash once per second rising...
Minimum working pressure: 0.1 bar Maximum working pressure: 10 bar 6 LITRE CRITICAL WATER LEVEL 200.00 12 | cistermiser.co.uk Have a question? Call our customer support team on 0118 969 1611 Have a question? Call our customer support team on 0118 969 1611 cistermiser.co.uk | 13...
Page 8
Stand at the distance from the sensor you would Sensor distance like to set as maximum range. Wait 8 seconds is now set. until constant triple green LEDs show. 14 | cistermiser.co.uk Have a question? Call our customer support team on 0118 969 1611 Have a question? Call our customer support team on 0118 969 1611 cistermiser.co.uk | 15...
The sensor blinks red when the min or max value is reached. Exit without saving by pressing the button. Exit without saving by pressing the button. Exit without saving by pressing the button. 16 | cistermiser.co.uk Have a question? Call our customer support team on 0118 969 1611 Have a question? Call our customer support team on 0118 969 1611 cistermiser.co.uk | 17...
Continuous flow into the pan from the cistern your product is faulty, please either contact Please make a note of the serial number and Cistermiser directly on 0118 969 1611 or at take a photograph of the installation before Water flowing through the overflow; ensure that the water entering the support@cistermiser.co.uk, with a...
Cistermiser, Unit 1, Woodley Park Estate, 59-69 Reading Road, Woodley, Berks, RG5 3AN. Product serial number Installation address...
Page 12
Notes 22 | cistermiser.co.uk Have a question? Call our customer support team on 0118 969 1611 Have a question? Call our customer support team on 0118 969 1611 cistermiser.co.uk | 23...
Page 13
The range is used in domestic, commercial combimate.co.uk and industrial applications worldwide. keraflo.co.uk Cistermiser Limited Unit 1, Woodley Park Estate, 59-69 Reading Road, Woodley, Reading, Berkshire RG5 3AN t: +44 (0) 118 969 1611 e: sales@cistermiser.co.uk cistermiser.co.uk A Davidson Holdings company SIP/36 Rev 3...
Need help?
Do you have a question about the Easyflush EVO 1.5 and is the answer not in the manual?
Questions and answers