Siemens SIMATIC S7-1500 Equipment Manual page 20

Product overview
3.3 Hardware properties
View of the module
The following figure shows the CPU 1517T‑3 PN/DP.
Figure 3-1 CPU 1517T‑3 PN/DP
NOTE
Protective film
Note that a protective film is applied to the display in the delivery state of the CPU. Remove
the protective film if necessary.
Properties
The CPU 1517T‑3 PN/DP has the following properties:
Property
CPU display
20
Description
All CPUs of the SIMATIC S7-1500 product series feature a
display with plain text information. The display provides
information on order numbers, firmware version and
serial numbers of all connected modules. In addition, you
can set the IP address of the CPU and carry out further
network settings. The display shows occurring error mes­
sages directly in plain text.
In addition to the functions listed here, a multitude of
other functions that are described in the SIMATIC
S7-1500 Display Simulator are shown on the display.
Additional information
• S7-1500, ET 200MP system manu­
al
(https://support.automation.
siemens.
com/WW/view/en/59191792)
• SIMATIC S7-1500 Display Simulat­
or
(https://support.industry.siemens.
com/cs/ww/en/view/109761758)
CPU 1517T-3 PN/DP (6ES7517-3TP00-0AB0)
Equipment Manual, 11/2022, A5E36285525-AD