Riello MultiCOM 301 User Manual page 29

SERIAL 2
LINE BAUD RATE CONFIGURATION
The baud rate of SERIAL 2 line can be configured setting the dip-switch 7 and 8 as described in
the following table.
To make the chosen configuration effective, the device must be powered down and then powered
up.
(1)
: The baud rate can be set also using the software MultiSetup.exe (refer to ADVANCED
CONFIGURATION). In this case, leave DIP-switch no. 7 and no. 8 in the OFF position (default
software configuration: 9600).
RS485
TERMINAL RESISTOR
The device is supplied with embedded terminal resistor for RS485 bus (R
the resistor take action on the DIP-switch no. 6 as shown in the following table:
- ENGLISH -
BAUD RATE DIP 7
9600 ON
19200 OFF
38400 ON
Software
OFF
(1)
configuration
Rt (120Ω)
INSERTED
NOT INSERTED
- 29 -
DIP 8
ON
ON
OFF
OFF
=120Ω). In order to insert
t
DIP 6
ON
OFF