Advertisement
Figure 2
3.
Identify the 8 knock-out plugs at the top of the
deck
(Figure
3).
Figure 3
1. Knock-out holes
4.
Use a punch and hammer to remove the 8
knock-out plugs from the deck top
5.
Use a file to remove burrs from the holes where
you removed the knock-out plugs from the
flange.
3
Installing the Kit
Parts needed for this procedure:
1
g317987
8
8
Procedure
1.
g317982
1. Carriage bolt
2. Fin (shredder bar)
2.
g318546
(Figure
3).
2
Shredder bar
Carriage bolt (10 X 25 mm)
Flange locknut (10 mm)
At the bottom of the deck, align the holes in the
shredder bar to the holes in the deck
Figure 4
Loosely assemble the shredder bar to the deck
(Figure 4
and
Figure
5) with a carriage bolt (10
X 25 mm) and flange locknut (10 mm).
(Figure
g318182
3. Hole (bottom of the deck)
4).
Advertisement
