Receiving A Group Call; Area Selection; Talkgroup Naming - Motorola iDEN i390 Getting Started

RECEIVING A GROUP CALL

No action is necessary to receive a Group Call as long as your unit is not
busy in an active Phone or Private Call.
Any communication activity within the talkgroup that you select
automatically switches your unit into Group mode. You will receive the
talkgroup transmission as long as your phone is powered on.

AREA SELECTION

When in Group mode, you can send your communication only to those
talkgroup members in a specific location. This is useful when you know
where the individuals are located within the service area.
1. Press until you see "Group Ready" on your display.
2. Press .
3. Press under "Area".
4. Press to scroll through the targeted areas specified by
your local service provider.
5. Press under "Ok" to select the targeted area. The area selected
appears on the last line of your display.

TALKGROUP NAMING

To add a talkgroup name to your portable phone, press
.
For instructions on programming IDs and aliases, see "Private Call ID
Programming" on page 22.
24
i390 GETTING STARTED