Receiving A Group Call; Adding Or Storing A Talkgroup - Motorola I1000 PLUS User Manual

For more information about talkgroup lists, see "Adding or
Storing a Talkgroup" on page 41.
Cover Open
1. Press
Mode
displays. Your most recently used
talkgroup displays, for example,
"Talkgrp 10".
2. To speak, do one of the following:
• To place a call to this talkgroup,
press and hold the Push-to-Talk
(PTT) button. Wait for the chirp, then speak into the
microphone.
• To call another talkgroup, press
talkgroup name. Press and hold the PTT button. Wait for the
chirp, then speak into the microphone.
3. To listen, release the PTT button.

Receiving a Group Call

When you receive an incoming Group call, you hear a brief chirp-like
tone. Your i1000plus automatically switches to Group mode, and the
talkgroup name displays.
1. Your phone must idle, that is, not busy in an active call or on the
browser.
2. Wait for the caller to finish speaking, then press and hold the PTT
button. Begin speaking after you hear the chirp.
3. To listen, release the PTT button.
You can receive group calls only in the talkgroups that you have
predefined. For more information, see ""Adding or Storing a
Talkgroup" on page 41".
Any communication activity within the talkgroup that you select
automatically switches your phone into Group mode.

Adding or Storing a Talkgroup

To add and store a talkgroup name to your i1000plus:
1. Press ,
2. Select "Ok".
3. At "Add New Entry?", select "Ok".
4. At "Enter ID", enter the desired talkgroup number.
Optional: At "Enter Name", enter a name for the talkgroup.
5. Select "Store".
until "Group Ready"
, ,
2 3
DEF
ABC
Making Group Calls
Group Ready
Talkgrp 10
11:15a 04/02
Alert
until you see the desired
.
Mail
41