Advertisement
B. THE HELMET
6. FACE SHIELD
Changing the visor shield is easy to do without tools. To replace the visor, it is
helpful to place the helmet on a flat surface or on your lap while seated.
REMOVING THE FACE SHIELD
1. Move the face shield into the
uppermost locked position.
2. On one side, pull the lever of the face
shield mechanism downward to release
the lower tab of the face shield.
3. Move the lower portion of the face
shield pivots upwards until the lower tab
is released from the face shield
mechanism.
4. Then, pull the face shield downward to
release the upper tab from the face shield
mechanism.
5. Repeat steps 1 4 for the other side.
INSTALLING THE FACE SHIELD
1. Insert the upper tab of the face shield
into the specific location on the face
shield mechanism.
2. Once the tab is in position, pull the
lever of the face shield mechanism
downward and slightly push the lower
portion of the face shield to put back in
position the lower tab of the face shield.
3. Then, release the lever. Make sure the
spring put it back to the up position and
2
check if the visor is correctly in place.
4. Repeat steps 1 - 3 for the other side.
1
For the other side, note that the face shield will be slightly tilted. Make sure the
lower tab of the face shield and the recess are perfectly aligned.
1
3
2
8
Advertisement
