Advertisement
A. GENERAL
1. SAFETY INFORMATION
This helmet is backed by the BRP warranty and a network of authorized
dealers ready to provide the parts, service or accessories that you may require.
Genuine BRP parts should be used for replacement to maintain the warranty,
consult an authorized BRP dealer.
Use this User Guide to acquaint yourself with your new helmet and its various
functions. Make sure you read and understand the contents of this guide and
keep it for future reference. The information and components descriptions
contained in this guide are accurate at time of publication. The illustrations in
this document may not show the typical construction of the different
assemblies or may not reproduce the full detail or exact shape of the parts
shown, however, they represent parts which have the same or a similar
function.
This guide uses the following safety alert symbol in conjunction with signal
words to indicate a potential personal injury hazard.
Indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
Address practices not related to personal injury.
Simply reading this guide will not eliminate hazards. The user must
understand and follow the instructions. Because of its ongoing commitment to
product quality and innovation, BRP reserves the right at any time to
discontinue or change specifications, designs, features or equipment without
incurring obligation. If anyone seeks to translate any portion of this guide into
any language, he must ensure that the translation is accurate.
W W ARNING
NOTICE
Riding a motorized vehicle can be dangerous. This helmet provides limited
protection to the head. It complies with U.S. Federal Motor Vehicle Safety
Standard 218.
However, it will not protect the wearer against all possible impacts. Some
serious head, brain, spinal, or other injury including paralysis or death.
For maximum protection, the helmet must fit firmly on the head with the chin
strap securely fastened.
If your helmet is equipped with a main visor, it must be fully closed. If your
helmet is equipped with other component, such as wind deflector, breath
deflector, breathing mask, mandible, etc., make sure to install them in proper
position to direct exhaled breath away from the main visor.
Always wear appropriate protection against frostbite, which may include a
balaclava, neck tube, facemask or combination of these items.
Inspect the helmet before each use following the inspection procedure in the
instructions. Replace any part showing wear or damage. Do not alter the
helmet or attach any items not recommended by the manufacturer. The
helmet is designed to absorb shock by partial destruction of the shell and it
should not be visible. Destroy and replace helmet if subjected liner, which may
not be visible. Destroy and replace helmet if subjected to a severe blow even if
it appears undamaged.
The helmet shell, liner and other components may be damaged and rendered
ineffective by petroleum products, cleaning agents, paint, adhesives, etc.,
without the damage being visible. Use only warm mild soapy water to clean
the helmet.
Follow all warnings and instructions provided with this helmet. For
replacement instructions, contact BRP. Failure to follow all warnings and
instructions can result in serious personal injury or death.
WARNING
4
result in
Advertisement
