Siemens SITRANS WFS300 Operating Instructions Manual page 7

WFS300 nameplate
Note
The nameplate shown is a typical example. Please check the nameplate on your device for
your specific device configuration.
Make sure the hazardous area approval is suitable for the environment in which the device
will be installed.
Instructions specific to hazardous area installations
(Reference European ATEX Directive 94/9/EC, Annex II, 1/0/6)
The following instructions apply to equipment covered by certificate number
FM13ATEX0032X, or certificate number FM14ATEX0027X, or both if neither certificate is
specified.
1. For use and assembly, refer to the main instructions.
2. The equipment is certified for use as Category 3G equipment per FM13ATEX0032X.
3. Per FM13ATEX0032X, the equipment may be used with flammable gases and vapors with
apparatus group IIA, IIB, and IIC, and temperature classes T1, T2, T3, T4, T5, and T6 in zone 2
hazardous locations.
SITRANS WFS300
Operating Instructions, 03/2021, A5E32880243-AC
WARNING
Safety notes
2.2 Installation in hazardous areas
7