Digital I/O Module - Nanda NA300 Series User Manual And Technical Specifications

NA300 Series Programmable Logic Controller Technical Specifications and User Manual
□ Synopsis
In this chapter, all types of digital I/O modules are introduced, in which the I/O return
circuit can not only be connected to the switch sensor of push button or limit switch, but
also be connected to the digital switch actuator such as indicator lamp of motor starter or
alarm annunciator. The status of certain bits on the data sheet of PLC will directly control
output, and the input will directly control corresponding bits on the data sheet of PLC.
This chapter will introduce the following subjects：
1. Introduction of available modules
2. The most important characteristics of modules
3. Appearance and Wiring schematic of digital modules
□ Content
This chapter will introduce the following I/O modules:
Section
4.1 Digital input module DIM301-1601
4.2 Digital input module DIM301-3201
4.3 SOE module IIM301-1601
4.4 SOE module IIM301-3201
4.5 Digital output module DOM301-1601
4.6 Digital output module DOM301-3201
NA300 series PLC provide many kinds of digital expand modules for users,
including normal digital input module NA300 DIM301, sequence of events input module,
NA300 IIM301 and digital output module. Please see table 4.1 for more information.
Table 4.1 List of NA300 I/O modules
Type
DIM301-1601

4 Digital I/O Module

Name
16 channel Digital input module
Content
DI16×DC24V(Sink or Source)
33
Specification