Nanda NA300 Series User Manual And Technical Specifications page 115

NA300 Series Programmable Logic Controller Technical Specifications and User Manual
RDY: Main control exchanging data with Profibus indicator LED. When it

blinks, data exchange goes normally. When it lights always or goes off, data
exchange goes abnormally.
STA: Slave Configuration Indicator LED. It goes on when receiving data

correctly from the master
BUS: Bus Communication Indicator LED. It lights always when the master

could communicate normally with slave; and it goes off when the
communication is abnormal.
ERR: Bus Error Indicator LED. It lights always when a diagnosable Fieldbus

error occurs; and it goes off when bus communication is normal.
Technical Specification
CMM type
Order NO.
Power Consumption
Current Consumption
Number of Communication Port
Type of the port
Baud Rate
Interface Isolation
Communication Program
Weight
Dimensions W×H×D（mm)
Hardware Setting and Communication Interface of CMM301-0103
1. DP Slaver address switch
The module provides two decimal rotary address encoder switches S1 and S2.
CMM301-0103
300CMM3010103
2.0W/5V
400mA/5V
1
Standard PROFIBUS-DP slaver
4800~12Mbps
optoelectronic isolator 2500V rms
GSD file supported by offer
220g
40×145×158
- 114 -