Blaupunkt CAR 300 Operating Instructions Manual page 9

the six strongest transmitters from that
Reception range stored.
RDS transmitters become with the automatic
Storage prefers and on first
Memory sizes put down.
When leaving the reception range that
stored transmitter again branch branch
press, in order to store new transmitters.
AS-memory sizes can also manually
are occupied (see "memory", page 10).
Becomes TP forwards or during automati
schen storing switched on, calls that
Equipment after terminating the transmitter
browsing
a memory size with Verkehrsfunksender
on (not necessarily memory size 1).
Stored transmitters call up
Select wave band ("U", "UAS", "M",
"MAS", "L"). Then the desired station
gropes press.
Around the transmitters stored with AS
to call, only select wave band ("U"
or "M"), then branch branch press briefly.
UKW auxiliary memory
Additionally to the station keys that puts
Turns out an UKW auxiliary memory on, in
that
all receptionable UKW transmitters abgespei
are chert. In this memory can do with that
Browsing keys become "leafed".
The UKW auxiliary memory becomes either
by automatic storing (AS)
or manually again created.
Sheets in the UKW auxiliary memory:
RDS switch on. Browsing keys
touch lightly briefly ►. In the display those
appear
Frequencies and/or program name that
Transmitter, in the UKW auxiliary memory
after
Senderkette are sorted put down.
Update the UKW auxiliary memory:
RDS key approx. 2 sec. press, to
Backward tone sounds. In the display
appears
briefly
The memory procedure is after
approximately 30 sec.
finally, and it becomes the strongest
Transmitter adjusted in the reception area.
On the station keys the
Transmitters are not overwritten here!
Or:
Branch branch press, to backward tone he
sounds.
Here become however on the AS
Memory sizes of the station keys gespei
cherten transmitters overwritten.
or
stored
11