Blaupunkt CAR 300 Operating Instructions Manual page 11

after incorrect decoding attempts
Waiting periods off.
The number of remaining decoding
tries in the display one indicates.
During the waiting period the radio must
remain switched on. After first
both unsuccessful attempts amounts to the
waiting period
approx. 10 sec., then 10 minutes. After that
9.
incorrect attempt amounts to the waiting
period 640
Minutes.
After 10 unsuccessful attempts the
equipment becomes
closed ("SAFE" appears in the display).
liable to pay the costs interchange by an
auto
risierte OPELs workshop is then necessary.
It is advisable therefore, already after that to
6.
Unsuccessful attempt the restarting
operation of
an authorized Opel-General-Motors Dealer
durchfüh
ren to leave.
Code
Activate (theft protection)
1.
Ignition switch on.
2.
Radio switch off.
3.
Keep pressed to branch branch and
at the same time switch radio on. After
To 3 sec. sounds backward tone. Then
those
Key release. In the display appears
"CODE", after 3 sec. appears" — -".
4. Code number (from Car passport or radio
Passport) with the station keys 1.2.3 and
4 input.
Example: The code number is 0365
Station keys i display
0 press 1 x key 1 --
4 x key 2 press 0 3
7 x key 3 press 0 3 6
6 x key 4 press 0 3 6 5
5. Code store with branch branch: Key
approx.
Sec. press, until backward tone takes
place
and audio muting is waived.
Codes?
(Theft protection activates?)
The coded equipment points to everyone
Switch on briefly "CODE" in the display on,
if the ignition is switched on.
With switched off equipment and abgezoge
nem ignition key shows code shining
diode by flashing on that the anti
Theft coding is activated.
Restarting operation after Tren
nung of line voltage
1.
Ignition switch on.
2.
Radio switch off.
3.
Keep pressed to branch branch and
at the same time switch radio on. After
To 3 sec. sounds backward tone. Then
those
Key release. In the display appears
"SAFE", after 3 sec. "10 -------- ". The
number
gives the number the still permissible
Input attempts of the code number on.
4. Input of the code number according to
Car
Passport or radio passport: Code number
with the station keys 1.2.3 and 4
input (see a "coding").
3
With incorrect input code number over
write, i.e. input completely again.
5. Code number confirm:
If the correct code number in the this
play to read is, branch branch approx. 3
sec.
long press, until backward tone takes
place
and audio muting is waived.
6. Incorrect code number became eingege
ben and confirms:
In the display "9 appears SAFE" and after
Sequence of the waiting period "9
Now those
correct code number input.
After the restarting operation that leads
Turns out a MEMORY browsing through.
Decode
(Waive the theft safety device)
Proceeding as under "coding".
After successful decoding those becomes
Audio muting of the radio waived.
The equipment is now no more theft
protected, can thus after an operation
spannungsunterbrechung again in operation
are taken.
".
13