Haier AD96NAHAEA Service Manual page 49

Auto restart function setting
A
U
T
O
TEMP
ON
OFF
SWING
MODE SLEEP
HEALTH FRESH
CLOCK SET
TIMER HIGH/SO
FILTER
LIGHT LOCK
RESET CODE
Setting method (to be applied for a necessary situation) :
After the power failure compensation is set, if power failure suddenly occurs while the air conditioner
is working, it will resume the previous working state when the power is supplied again.
Setting Method: When the remote controller is on (excluding timer mode and fan mode),
press the "Sleep" button on the remote controller 10 times within 5
seconds, and after the buzzer rings 4 times, the air conditioner will enter
the state of auto restart.
Cancel Method: Press the "Sleeping" button on the remote controller 10 times within 5
seconds, and after the buzzer rings 2 timer, the auto restart mode will be
cancelled.
Notes: When a power failure suddenly occurs during the air conditioner is working after the power
failure compensation is set, if the air conditioner will not be used for a long time, please cut off the
power supply to prevent its operation from being resumed after the power is supplied again, or press
the "Switch On/Off" button after the power comes again.
If the unit has not the "sleep" button or function, please realize the function by pressing "swing"
with the same method.
49
Commercial Air Conditioner
A
FAN
Model: AU96NATAEA
AD96NAHAEA, AP96NACAEA