Muse M-095 BT - Bluetooth Classical Radio Manual

Table of Contents

Contents

1 LOCATION AND DESCRIPTION OF CONTROLS
2 POWER SUPPLY
3 TURNING UNIT ON/OFF
4 LISTENING TO THE RADIO
5 BLUETOOTH FUNCTION
6 CONNECTING AUXILIARY SOURCE
7 USB CHARGING
8 TECHNICAL SPECIFICATIONS
9 SAFETY INSTRUCTIONS
10 Documents / Resources
- 10.1 References
- 10.2 Download manual

LOCATION AND DESCRIPTION OF CONTROLS

Read the instructions carefully before operating the unit.

LOCATION AND DESCRIPTION OF CONTROLS

ON/OFF switch
Function switch: FM or Bluetooth
VOLUME control
Bluetooth indicator
Tuning knob with dial pointer
Speaker
NFC tag
FM telescopic antenna
AC power cord
USB charging port
Aux in jack

POWER SUPPLY

This set operates on AC 100-240V 50/60Hz.
Connect the power cord to a convenient AC wall outlet.
Note: (Bluetooth and Aux mode only)
In a concern of saving energy, when playback has reached to the end or not playing, the unit will automatically turn off after 10 minutes. To reset the unit, slide the ON/ OFF switch to OFF position. Wait a few seconds and then turn ON the unit again.

TURNING UNIT ON/OFF

Slide the ON/OFF switch to ON position to turn on the unit. The dial scale background light will turn on.
Slide the ON/OFF switch to OFF position to turn off the unit. The dial scale background light will turn off.

LISTENING TO THE RADIO

Slide the ON/OFF switch to ON position to turn on the unit.
Slide the function switch to FM position to select FM mode.
Use the tuning control to tune to your desired radio station.
Adjust the volume level.

To enhance radio reception ability: Extend the telescopic antenna.

BLUETOOTH FUNCTION

The Bluetooth^® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by New One S.A.S is under license. Other trademarks and trade names are those of their respective owners.

Pairing a Bluetooth Device
Slide the ON/OFF switch to ON position to turn on the unit. Slide the Function switch to position. The Bluetooth indicator will blink slowly indicating it's in pairing mode. On the Bluetooth device, enable Bluetooth and select "M-095 BT" from the Device List. (Refer to the user manual of the device to be connected for detailed operations.) If the Bluetooth device prompts for a passcode, use "0000". Some Bluetooth devices will ask you to accept the connection. If the units are paired properly, you will hear the indication sound. The Bluetooth indicator will remain on.

Note:

If there is no pairing or pairing is not successful within 10 minutes, the unit will turn off automatically. To reset the unit, slide the Function switch to OFF position. Wait a few seconds and then turn ON the unit again.
If you want to connect your Bluetooth speaker to another Bluetooth audio device, you need to disconnect current device first and follow the steps above to make a new connection.
On some devices such as computers, once paired you must select the unit from the Bluetooth menu and choose "Use as Audio Device (stereo)" or similar.
Pairing remains intact when the unit and/or your Bluetooth device is taken out of communication range. An active connection will be re-established when your Bluetooth device returns within range.
When the unit is turned on again, it will automatically try to reconnect with the most recently paired Bluetooth device.

Using a Bluetooth Device

With a unit paired (see previous section), operate your Bluetooth device and its sound will be heard through the M-095 BT's speaker.
Select and play audio files or music on your Bluetooth device.
Adjust the volume to desired level.

Note: The Bluetooth indicator remains on during playback.

Using a NFC Device
NFC (Near Field Communication) is a technology that enables short-range wireless communication between NFC-enabled devices, such as mobile phones.

Slide ON/OFF switch to ON position to turn on the unit. Slide the Function switch to position. The Bluetooth LED indicator will blink slowly indicating it's in pairing mode.
Enable NFC and Bluetooth on your Bluetooth device (see the user manual of your device for details), tap the NFC device on the NFC tag of this unit. If the units are paired properly, you will hear the indication sound. The NFC device is connected to this unit via Bluetooth.
Select and play audio files or music on your NFC device.
To break the connection, tap the NFC device with the NFC tag on this unit again.

Note: The operational range between the main unit and a NFC device is approximately 10 meters.

CONNECTING AUXILIARY SOURCE

Connect your auxiliary source (e. g. mp3 player) to the AUX IN jack on the unit (cable not included). The unit will switch to AUX mode automatically.
Start playback from your auxiliary source.
Adjust the volume to desired level.
To stop playback, disconnect your auxiliary source from the AUX IN jack.

USB CHARGING

This unit is equipped with a built-in USB charging port (Output: 5V 1A) for recharging your mobile device (e. g. Smartphone, tablet, etc.)
Simply plug the USB charging cable (not included) into the USB charging port and connect it to your mobile device.

TECHNICAL SPECIFICATIONS

POWER SUPPLY: AC 100-240V 50/60Hz, 15W consumption
RADIO: FM 88-108MHz
BLUETOOTH
Bluetooth Version: V4.2 + EDR
Bluetooth: 2.402-2.48GHz
RF Output Power: 0 dBm
Working Distance: Up to 10 meters measured in open space (wall and structures may affect range of device)

Specifications are subject to change without notice.

Hereby, NEW ONE S.A.S, declares that this MUSE M-095 BT is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at www.muse-europe.com

SAFETY INSTRUCTIONS

To reduce the risk of electric shock, do not open the device, there is no party inside for the user. Refer all servicing to qualified personnel.
shock hazard The lightning with the arrow symbol in the triangle is a warning sign alerting the user to "dangerous voltage" inside the unit.
caution The exclamation point in the triangle is a warning sign alerting the user of important instructions accompanying the product.
The caution mark is located at the back of the device.

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The use of apparatus in moderate climates.
The Marking plate is located at the back of the device.
Make sure to have a minimum distance of 5 cm around the unit for sufficient ventilation.
Ensure that the ventilation openings is not covered with items such as newspapers, tablecloths, curtains, etc.
Do not place naked flame sources, such as lighted candles on the apparatus.
Do not expose this appliance to dripping or splashing water.
Do not place objects filled with liquids, such as glass, vase on the device.
The power plug is used as a disconnect device and must be easily accessible. To be completely disconnected from the power, the plug of the appliance should be disconnected completely. The socket must not be obstructed and should be easily accessible during intended use.
Under the influence of fast transient and / or electrostatic electric phenomenon, the product may malfunction and the user must perform a power reset of the device.

If in the future, you need to get rid of this product, please note that Waste electrical products should not be disposed of with household waste. Recycling facilities exist. Check with your municipality or ask your dealer for advice. (Directive for Waste Electrical and Electronic Equipment)