Table of Contents
Advertisement
EN
11.1 Preparation
Take the appliance out of the packaging.
Remove all packaging material including polystyrene base, keep them out of childrens
reach. While opening the package, water drops may be seen on plastic bag and port-
hole. This normal phenomenon results from water tests in the factory.
Note: Packaging disposal
Keep all packaging materials out of children´s reach and dispose them in an environmen-
tally friendly manner.
11.2 OPTIONAL: Install noise reduction pads
1. When opening the shrink package, you will fi nd
some noise reduction pads.These are used for re-
ducing noise (Fig. 11-1).
2.
Lay the washing machine down to its side, porthole
pointing upwards, bottom side towards operator
(Fig. 11-2).
3. Take out the noise reduction pads and remove
the double-sided adhesive protective fi lm; paste
around the bottom; the noise reduction pads un-
der the washing machine cabinet as shown in Fig.
11-3 (two longer pads in position 1 and 3, two
shorter pads in position 2 and 4). Finally set the
machine upright again.
Note: Noise reduction pad
Noise reduction pad is optional , could help to reduce noise , please assemble it or not
according to your own demand.
11-Installation
11-1
2.
2x
2x
11-2
10-1
11-3
29
Advertisement
Table of Contents
