Table of Contents
Advertisement
7.
Keep children away. Children
must never be allowed in the work
area. Do not let them handle
machines, tools, or extension cords.
8.
Store idle equipment. When not
in use, tools must be stored in a dry
location to inhibit rust. Always lock up
tools and keep out of reach of children.
9.
Use the right tool for the job. Do not
attempt to force a small tool or
attachment to do the work of a larger
industrial tool. There are certain
applications for which this tool was
designed. It will do the job better and
more safely at the rate for which it
was intended. Do not modify this tool
and do not use this tool for a purpose
for which it was not intended.
10. Dress properly. Do not wear loose
clothing or jewelry as they can be
caught in moving parts. Protective,
electrically non-conductive clothes and
non-skid footwear are recommended
when working. Wear restrictive hair
covering to contain long hair.
11. Do not overreach. Keep proper footing
and balance at all times. Do not reach
over or across running machines.
58918
SAVE THESE INSTRUCTIONS.
For technical questions, please call 1-888-866-5797.
12. Maintain tools with care. Keep
tools maintained and clean for better
and safer performance. Follow
instructions for lubricating and
changing accessories. The handles
must be kept clean, dry, and free
from oil and grease at all times.
13. Stay alert. Watch what you are
doing, use common sense. Do not
operate any tool when you are tired.
14. Replacement parts and accessories.
When servicing, use only identical
replacement parts. Use of any other
parts will void the warranty. Only use
accessories intended for use with
this tool. Approved accessories are
available from Harbor Freight Tools.
15. Do not operate tool if under the
influence of alcohol or drugs. Read
warning labels on prescriptions to
determine if your judgment or reflexes
are impaired while taking drugs. If there
is any doubt, do not operate the tool.
16. Maintenance. For your safety, service
and maintenance should be performed
regularly by a qualified technician.
17. Only use this product on a
flat, level, solid surface.
18. Do not use for aircraft purposes.
Page 3
Advertisement
Table of Contents
