Download Print this page

AVLink SD-1 User Manual

Multi-format video matrix

Advertisement

Quick Links

Multi-Format
Video Matrix
SD-1
SD-2
SD-3
SD-4
U
M
SER
ANUAL
SD-1 / SD-2 / SD-3 / SD-4
Package Contents
1 x SD-1 / SD-2 / SD-3 / SD-4 Unit
1 x User Manual
1 x Power Adapter DC 12V with Lock
2 x Screws
4 x Foot Pads
1 x Female 1X3 Pole Captive Screw Socket
Anything missed, please contact with your vendor.
Features
HDTV resolution up to 1080P@60
Supports RS-232
Copy EDID from HDMI OUT A
HDCP Compliant
Compliant with the specification of HDMI
Hot pluggable
Supports《AV Matrix》Management Software
-1-
Specifications
Function
HDMI Input Connector
HDMI Output Connector
VGA Input Connector
LEDs (Selected)
Source Select
Power Adapter (Min.)
Max. Resolution
RS-232 Connector
V1.0
Baud Rate
Housing
Weight
Dimensions (LxWxH)
Function
HDMI Input Connector
HDMI Output Connector
VGA Input Connector
VGA Output Connector
LEDs (Selected)
Source Select
Power Adapter (Min.)
Max. Resolution
(HDMI Output)
Max. Resolution
(VGA Output)
RS-232 Connector
Baud Rate
Housing
Weight
Dimensions (LxWxH)
SD-1
SD-4
2 (A-Type
1 (A-Type
Female)
Female)
2 (A-Type Female)
NONE
1
2 (IN A, IN B)
TACT SW X1, AV Matrix
DC 12V (LOCKING JACK)
1080P@60 (12 Bits)
1X3 Pole Captive Screw
9600 bps; 8 data bits, 1 stop bit,
no parity
Metal
298g
355g
120 x 75 x 33mm
SD-2
SD-3
2 (A-Type
1 (A-Type Female)
Female)
1 (A-Type Female)
NONE
1
1
2 (IN A, IN B)
TACT SW X1, AV Matrix
DC 12V (LOCKING JACK)
1080P@60 (12 Bits)
1080P
(RGB 12 Bits, YCbCr 4:4:4 12 Bits,
YCbCr 4:2:2 8 Bits )
1X3 Pole Captive Screw
9600 bps; 8 data bits, 1 stop bit, no
parity
Metal
355g
363g
120 x 75 x 33mm
-2-

Advertisement

loading
Need help?

Need help?

Do you have a question about the SD-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for AVLink SD-1

  • Page 1 Package Contents Weight 298g 355g SD-1 Dimensions (LxWxH) 120 x 75 x 33mm  1 x SD-1 / SD-2 / SD-3 / SD-4 Unit  1 x User Manual  1 x Power Adapter DC 12V with Lock Function SD-2 SD-3 ...
  • Page 2 3. Connect the HDMI / VGA cable between the HDMI / VGA display and the “HDMI OUT1 or HDMI / VGA OUT2” port of SD-1 / SD-2 / SD-3 / SD-4. Rx: Receive RS232-level signal pin. (Data in) 4. Turn on the HDMI / VGA source and display.
  • Page 3 © C&C TECHNIC TAIWAN CO., LTD. All rights reserved. Technical Specifications Trademarks: HDMI Output Signal All the companies, brand names, and product names referred to this manual are the trademarks or registered trademarks belonging to their respective companies. Pin # Signal Pin # Signal...

This manual is also suitable for:

Sd-2Sd-3Sd-4