Table of Contents
Advertisement
Caution and care
HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT(E.G., TV)
POWER SOURCE
This appliance operates from a power source of 12 V DC (direct current) or 24 V AC (alternating current) only.
CONNECTING THE POWER CORD TO THIS APPLIANCE
･ When using the supplied AC adapter or 12-V DC power source:
Make sure to connect the positive (+) connector and the negative (-) connector of the power cord to the +12V terminal and the
GND terminal of this appliance respectively. Do not connect the power cord to the terminal for a 24-V AC power source.
Incorrect connection or connection to a wrong terminal will damage the appliance.
When using the supplied AC adapter, use only rated input and output range that indicated on the bottom of AC adapter,
･ When using a 24-V AC power source:
Connect the power cord to the terminal for 24-V AC power source correctly. Leave the GND terminal unconnected.
NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT
Touching the inside of the cabinet or inserting foreign objects of any kind not only creates a safety hazard but can also cause
extensive damage.
PROTECT THE POWER CORD
Damage to the power cord may cause fire or shock hazard. If the mains cord is damaged, switch off the mains outlet and
carefully unplug the cord by holding the mains plug.
UNPLUG THE POWER CORD DURING A LONG ABSENCE
Unplug the power cord to turn off the power during a long absence.
PROTECT FROM EXCESSIVE FORCE OR SHOCK
To prevent fire or shock hazard, the appliance need to be protected from excessive force or shock.
MAINTAIN GOOD VENTILATION
Do not obstruct the many ventilation holes on the unit. For maximum ventilation, leave some space around the unit and place
the unit on a hard level surface only, and ensure it is not covered during use. Heavy objects should never be placed on the unit.
WHEN NOT IN USE
When not in use always unplug the power cord.
CABINET CARE
Never use petroleum-based cleaners. Clean with a soft cloth moistened with soap and water and wipe dry. PVC cables or
leads should not be left in contact with the cabinet surface for long periods.
INSTALLATION LOCATION
For excellent performance and lasting reliability install in a location that is:-
1. Well ventilated, out of direct sunlight and away from direct heat.
2. A solid vibration-free surface.
3. Free from high humidity, excessive dust and away from magnetic fields.
4. Please ensure that the ventilation fan located on the unit's back panel is not blocked.
UNSUITABLE LOCATIONS
Placing the unit in the following places might shorten the product life:
･ Extremely cold places, such as refrigerated warehouses and ice houses
･ Places where excessive hydrogen sulfide is likely to be generated, such as hot-springs areas
･ Places or locations with salt air environment
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE. THIS APPLIANCE MUST BE GROUNDED.
CAUTION ON USE IN UK AND IRELAND
Do not use the power cord with the plug provided in this appliance. Use the appropriate AC power code for your country.
This Video Server Box complies with the requirements of the EC Directive 89/336/EEC, "EMC Directive". The requirements
for the susceptibility according to EN 55024 and the requirements for interference according to EN 55022 are observed for
the operation on residential areas, business, light industrial premises and in small scale enterprises, inside as well as outside
of the building. All places of operation are characterized by their connection to the low voltage power supply system (DC 12
V or AC 24 V).
The AC adapter provided this product complies with the requirements of the EC Directive 89/336/EEC, "EMC Directive" and
73/23/EEC, "Low Voltage Directive", as amended by Directive 93/68/EEC. The requirements for the susceptibility according
to EN 55024 and the requirements for interference according to EN 55022 are observed for the operation on residential
areas, business, light industrial premises and in small scale enterprises, inside as well as outside of the building. All places
of operation are characterized by their connection to the public low voltage power supply system. This AC adapter is
manufactured in accordance with EN 60950.
There may be cases when the unit's built-in MOTION DETECTION function does not operate properly due to external
condition or video input signal or other factors.
The user will not be indemnified for problems (e.g., monitoring failure or remote operating failure) that occur with either the
unit or a connected device during operation.
5
English
DX-VS1UE Setup Guide
Advertisement
Table of Contents
