4. TV Menus
Note: When the Daylight Savings Time change occurs, you must open this menu and set the TV's clock ahead or back.
• The TV clock must be set before you can use the Timer feature.
• As a reminder that the TV Timer is set, the TV POWER indicator flashes slowly while the TV is powered off.
• When the Timer turns on the TV, press any key on the remote control to keep it from turning off after five minutes.
After channel scan, Edit lets you add and delete memorized channels.
• Press PAGE
to jump to the next or previous page of channel numbers.
to move through all channel numbers, one at a time.
Adding/Deleting Channels Using the Channel Edit Menu
Channels marked with a check are in memory.
To add or delete a channel from
To add a single digital channel not in the list, see the full owner's guide at www.mitsubishi-tv.com.
For assistance call 1(800) 332-2119
Select either English or Spanish for on-screen menus.
Select the language for a digital program from the
Set the TV clock to:
Use the TV Timer to power on the TV automatically at a preset time
Receive correct updates to ChannelView listings
The Timer tells the TV to power on automatically at a time you set. Use this menu to set a day,
time, input, and channel for the Timer. If the TV is already on at the set time, the TV will auto-
matically change to the designated channel or input.
See "Memorizing Channels with Channel Scan" on page 7 to scan for all available channels
on the ANT input.
memory, highlight the channel number and press ENTER.
Standard is for most viewing conditions. Use Bright in brightly lit rooms. You may
notice increased fan noise when using the Bright setting.
Select On to see blue accent lighting when the TV is powered on.
See "Home Network Setup," page 19.
ANT input (if available).