ChannelView Channel Listings
ChannelView displays program descriptions sent by
broadcasters. This information may be unavailable
in some areas.
ChannelView™ shows memorized channels on the ANT
input. It displays channel names and program information
for digital channels. No program information is displayed
for analog channels.
ChannelView allows you to set up three banks of custom
channels for convenient access. You can save groups of
channels by content (e.g., news, sports, children's program-
ming) or by TV user.
Note: You must first set the TV Clock (page 24) to
receive ChannelView listings.
ChannelView, "All" tab. Programs for the tuned channel
are listed on the right.
ChannelView Custom Channel Banks
Select a channel bank to customize.
GUIDE to display ChannelView.
MENU to move the highlight to the bank
to select Bank 1, 2, or 3.
With the bank name highlighted, press
enter setup mode where you can select channels to
include in the bank.
EXIT when finished with setup.
Using Custom Channel Banks
While watching TV, press
tune only to channels stored in the current bank.
change to a different channel bank:
. The TV will
3. TV Features
to highlight a bank.
MENU to see channels in the bank.
To allow tuning to any channel in memory, select
the All bank.
Photos and Moving Video as
Note: 838 series TVs can display photos and play mu-
sic from a USB drive. See the detailed owner's
guide at www.mitsubishi-tv.com.
Connect the camera to the TV using a composite video
cable and control the slide show or movie through the
camera. The display resolution will be standard-defini-
Refer to the owner's manual supplied with the
camera for instructions needed for this setup.
Set the camera's output signal type to
put the camera into playback mode.
With the camera still turned on, connect your digital
camera's composite video cable (usually yellow) to
the TV's Y/VIDEO jack. To hear audio, connect the
camera's audio output cable to the AUDIO L jack.
Camera connection using a composite video cable
New Device Found screen displays,
assign the name Camcorder.
EXIT to close the New Device Found screen.
Highlight the icon for the camera input and press
If viewing photos, control the slideshow from the
camera. Advance through the images manually or
check if the camera can advance automatically.
For assistance call 1(800) 332-2119