Download  Print this page

Mitsubishi Electric WD-65738 Basic Owner's Manual Page 32

838 series, 738 series home-cinema television.
Hide thumbs

Advertisement

32
Appendices
Appendix C: Troubleshooting, continued
Reset Name
When to Use
A/V Reset
To reset audio and
(for all inputs)
video adjustments for
all inputs to the original
factory settings.
Channel
To erase and
Memorization
re-memorize channels
on the ANT input.
Lock Menu
To change your Lock
Pass Code
menu pass code
Control-Panel
To re-enable the
Lock Release
control-panel buttons
after activation of the
Control-Panel Lock
System Reset
If the TV does not turn
on or off, does not
respond to the remote
control or control-
panel buttons, or has
audio but no video.
TV Reset
To reset all consumer-
accessible settings
IMPORTANT:
and all memories to
Use this reset
the original factory
only if other
defaults.
troubleshooting
has been unsuc-
Use TV Reset if the TV
cessful.
can respond to con-
trols but TV behavior is
abnormal.
CAUTION: All owner-
performed setups and
adjustments will be
erased.
VUDU
You have forgotten
Reset VUDU
your account pass-
Account Pass-
word.
word
VUDU
You have forgotten
Reset Parental
your pass code.
Controls Pass
code
For assistance call 1(800) 332-2119
How to Use
While viewing the TV, press the
control-panel buttons INPUT and
VOLUME DOWN at the same time for at
least two seconds.
1.
MENU and go to Setup >
Press
Channel.
2.
Highlight the reception mode,
e.g. Ant Air, and press ENTER.
3.
All Channels and
Highlight
press ENTER.
4.
Scan.
Highlight
5.
ENTER to start channel
Press
memorization.
See the detailed owner's guide at www.mitsubishi-tv.com for instructions.
Press and hold the INPUT button on
the control panel for ten seconds. If
the TV is powered off, you can now
press the POWER button to turn it on.
Press and hold the POWER button on
the control panel for ten seconds.
1.
While viewing the TV, press
MENU to display the TV main
menu.
2.
With the main menu displayed,
press number keys 1 2 3 to
display the Reset menu.
3.
READ THE ON-SCREEN
WARNING AND INSTRUC-
TIONS.
If you do not wish to use this
reset, press EXIT or MENU to
back out.
If you wish to continue,
press ENTER to erase all
memories and settings.
Using a computer, go to
www.VUDU.com.
Call VUDU Customer Care at
1-888-554-VUDU (8838).
Resulting Action
All Audio and Video settings are
returned to the original factory
settings, including global settings
not affected by Picture > Reset.
All previously memorized chan-
nels for the antenna input are
erased and a new set of memo-
rized channels is created. To
add or delete individual channels,
see the Setup > Channel > Edit
menu instructions on page 24.
Allows the control panel to be
unlocked if the remote control is
misplaced.
The TV will turn off. Power on the
TV and the green LED will flash
quickly for about one minute. The
changes you made most recently,
before using SYSTEM RESET, may
be lost.
The TV will start the initialization
process and then turn off.
Power on the TV and the front
green LED will start flashing. All
memory and settings outlined in
this Owner's Guide will need to
be set again.
Reset your account password
from the VUDU website (requires
access to e-mail).
VUDU Customer Care will reset
your pass code.

Advertisement

Table of Contents

   Also See for Mitsubishi Electric WD-65738

   Related Manuals for Mitsubishi Electric WD-65738

This manual is also suitable for:

Wd-65838Wd-73738Wd-73838Wd-82738Wd-82838Wd-60738 ... Show all

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ron Apr 19, 2018 02:15:
    Put new lamp in the TV flitting what up.