Peavey 6505 II Operating Manual page 3

Peavey 6505
®
Congratulations on your purchase of the all new 6505® II. Peavey's classic high-gain legacy continues with the 6505® II. Like the
original 6505 head, the 6505 II offers two channels. However, the 6505 II adds separate EQ, Resonance, and Presence controls
to each channel, giving you more control and flexibility. The new footswitch provides foot control of channel selection, effects
loop, and the newly added ability to select the Crunch feature. Now you can instantly obtain that extra gain in the Rhythm
Channel with your foot and never have to take your hand off the guitar. Finally, the Clean Channel has been added, completely
redesigned to sound much cleaner, and has one 12AX7 devoted to just the Clean/Crunch.
The following guide explains these features and how to operate each one in order to obtain your desired sound. We recommend
that you read this manual carefully, paying close attention to any warnings or cautions.
FEATURES:
• Two distinct tube channels with footswitch control
• LED "active" indicators for each channel
• Bright switch for Rhythm channel
• Crunch switch on Rhythm channel with footswitch control
• Separate equalizer sections for each channel
• Separate power amp controls (Resonance and Presence) for each channel
• Separate preamp controls (Pre and Post Gain) for each channel
• Standby power switch
• Bias test points on rear panel
• Effects loop with footswitch control
• 1/4" Preamp output jack
• Speaker impedance selection switch (4, 8, 16 ohm)
• Two parallel 1/4" speaker output jacks
• 120 watts output power ohm output power
• Metal three button footswitch with detachable 25' cable
VENTILATION: For proper ventilation, allow 24" clearance from the nearest combustible surface.
All vents should have a minimum of 2" of free air space so air can flow thru the unit freely for proper cooling.
ENGLISH
II
®