Install The Battery Pack; Remove The Battery Pack; Operation Tips; Start The Machine - GreenWorks SW24B00 Operator's Manual

EN
8.1

INSTALL THE BATTERY PACK

• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the motor stops before
you install or remove the battery pack.
• Read, know, and follow the instructions in the battery
and charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.2

REMOVE THE BATTERY PACK

1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
9

OPERATION TIPS

• Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
• Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
WARNING
English
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
• Always wear eye protection with side shields marked to
comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into
your eyes and other possible serious injuries.
• Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended can
result in serious personal injury.
Do not use this product if it is not completely assembled or
if any parts appear to be missing or damaged. Use of a
product that is not properly and completely assembled or
with damaged or missing parts could result in serious
personal injury.
10

START THE MACHINE

1. Push the switch left or right.
Battery tools are always in operating condition. Lock the
switch when not in use or carrying at your side, when
installing or removing the battery pack, and when installing
or removing bits.
11

STOP THE MACHINE

1. Release the trigger to stop the machine.
8
WARNING
WARNING