Table of Contents
Advertisement
S-Video is preferable to composite video, if avail-
able.
7.
To use the TV speakers with the VCR, connect left
(white) and right (red) audio cables from AUDIO OUT
on the VCR back panel to the associated INPUT
AUDIO L and R on the TV main panel. If your VCR
is mono (non-stereo), connect only the white (left)
cable.
Note: When using this connection confi guration with the
connections used in step 5, it is possible to view
live cable programs through the VCR Device. For
best picture quality always view live cable programs
directly from the TV input connected to the cable
box device.
Older Cable Box
Required: One coaxial cable.
Note: This connection is not recommended. The
other connections described in this chapter
provide better quality audio and video to the TV
and allow NetCommand to work with the cable
box.
1.
Connect the incoming cable to
2.
Connect one coaxial cable from
box to ANT 1 on the TV main panel.
TV main
panel
Figure 10. Connecting an older cable box
IN on cable box.
OUT on the cable
2.
2.
Cable
OUT
box
IN
1.
Incoming
cable
3. TV Connections
A udio-Only Device
If you wish to connect an audio-only device to the TV, such
as an audio CD player or an MP3 player, follow these instruc-
tions.
1.
Insert an unused RCA-style connector into the
Y/VIDEO jack. The presence of this connector acti-
vates the TV's Auto Input Sensing feature.
2.
When the
Auto Input Sensing screen displays,
name the new input CD/Audio or MP3 Player.
3.
Connect left (white) and right (red) audio cables from
AUDIO OUT on the device to AUDIO L and R on the TV.
4.
Keep the connector in the
the audio-only device.
Audio-only device
INPUT 4
TV back
Figure 11. First insert an unused RCA-type connector
into the Y/VIDEO jack on the TV side or main panel
before connecting audio cables.
Y/VIDEO jack while using
2.
VIDEO
1.
USB
L
TV INPUT 4
R
convenience
Y/
VIDEO
panel
Pb
Pr
27
L
R
Y/
Advertisement
Table of Contents
