Heat Level - Heating Period; Maintenance Storage And Care Of The S-Pack Battery - therm-ic S-PACK Instructions Manual

Changing the heat setting:
• Press the control button briefly (approx. 1s) to
switch to next heat settings (Level1, Level2, Level3,
Level1...)
• Level1: A flash, lower heat settings.
• Level2: 2 flashes, moderate heat settings
• Level3: LED ON, higher heat settings.
Turning the device off:
• Press the control button for a longer period of time
(3 seconds) (1.3) to turn off the S-Pack battery.
• The S-Pack battery switches into POWER OFF
mode.
• No LED is illuminated on the heat setting display
(1.2).
• The heat is off.
Note:
Both S-Pack batteries can be used independently
with different heat levels.

HEAT LEVEL - HEATING PERIOD

The following table shows the heating period for
the heat levels, which can be set using the control
buttons.
Heat level S-Pack 700
1 6-8 h
2 4-5 h
3 1h45-2h15
The heating period per charge depends on the selec-
ted heating level, the ambient temperature and the
charging status as well as the age of the batteries.
Therefore heating times are provided for information
only and are not contractual.
MAINTENANCE STORAGE AND CARE
OF THE S-PACK BATTERY
To ensure a long life, we recommend storing the
S-Pack battery in a cool room (at temperatures
ranging from 5°C / 41°F to 20°C / 68°F) in a
semi-charged status. The S-Pack battery must be
S-Pack 1200 S-Pack 1400
12-14 h 14-16 h
5h30-7h30 6-8 h
3h45-4h15 4h30-5h00
12