Technical Specification - Nicols X-Line 10K RGB User Manual

User manual
Features
1. Full pure diode laser with more stable performance and longer working life. Diode solid-state
(DSS) laser is that when power on, the diode will have laser output directly. It can work properly between -30°C
and 40°C.
2. Made of analog laser modulation. Users can dimmer the laser brightness linearly to makes the
laser light more colorful.
3. Graphics & Effects: Beam show and animated graphics show patterns.
4. TF Card: 8GB, for storage build in program and downloading program.
5. Safety intelligent: PC control mode will shut off laser automatically without trigger signal. The
scanner failure protection will shut off the laser signal and the shutter will block the laser output automatically, so
as to avoid the single beam coming out.
6. Applicable for all kinds of large-scale outdoor performances, outdoor lighting projects.

Technical Specification

1. Voltage: AC90~250V/AC, 50HZ/60HZ
2. Rated Power: 180W
3. Waterproof Level: IP51
4. Work Environment: outdoor and indoor, -30 °C ~40 °C
5. Scanner: 40K High-speed optical scanner, ±30° big angle scanning
6. Laser: RGB analog modulate, 30KHZ frequency
Red laser, 3000mW, wavelength 638nm
Green laser, 3000mW, wavelength 525nm
Blue laser, 4000mW, wavelength 450nm
7. Beam Diameter<6mm, Divergence<1.5mrad
8. Working Modes: ILDA mode (PC Control), DMX512 (18 CH/25CH), PRG(TF card program), ILD(TF
card program), SOUD(Sound Active) Mode, AUTO Mode, Outdoor Mode, Master/Slave
9. Play Program Format: .ild laser show document
10. Safety Configure: Security protection, Laser key switch, laser remote interlock, SFS
Control(scanner fail safety control ON/OFF), flying rings bolt
11. Interface: 3 pins XLR jack for DMX, DB25 and RJ45 interface for PC control
12. Machine dimension: 195(L)*335(W)*165(H)mm
13. Machine Weight: 9.6Kg
X-Line 10K RGB
9