Technical Specifications - Nicols PAR LED 1418 Z IP User Manual

Product introduction
This product is designed for indoor/outdoor use. Suitable applications include wash or effect lighting for
architectural, stage or nightclub applications. This product can also be installed for use in signage and
advertising using the dynamic functions available with DMX512 control. Direct input of DMX512 signal allows
the units to be controlled from any DMX512 controller. This product can be operated as a single unit or in
multiple units for large applications.

1- TECHNICAL SPECIFICATIONS

* 14x18W ZOOM LED PAR
* IP65
* LEDs: 14 x 18W 6 in 1 RGBWA + UV + Full colour
* Power: 252W
* DMX Channels: 3/ 4/ 5/ 7/ 8/ 9/ 14
* Operation mode: Auto, DMX, Master/Slave, musical
* Dimming: 0-100% / Strobe 0-20Hz
* Beam angle: 8°-45°
* Consumption: 270W
* Power supply: AC100-240V, 50/60Hz
* Housing: Die-casting aluminum, powder-coated finish
* Dimensions: 340 x 240 x 330 mm
* Weight: 7kg
2- INSTALLATION
2.1 Mounting:
2.1-1 Hanging
The product can be mounted in a hanging position using the supporting bracket. The bracket should be
secured to the mounting truss or structure using a standard mounting clamp. Please note that when hanging
the unit a safety cable should also be used
.
2.1-2 Upright
The product can be mounted in an upright or sitting position using the supporting brackets.
NOTE:
The product can be mounted at any angle and in any position. It is possible to further adjust the angle of the
product using the two adjustment knobs located on the side of the fixture.