Mitsubishi WD570U User Manual page 43

Advanced display utilities (continued)
Conversion of a PPT file to PtG file using
the PtG Converter-Lite
1. Click the PtG Converter-Lite icon " " to execute
the program.
Menu bar
Menu bar
Right-click to open the menu.
Max Circle Animation:
Selects the max time of animation.
About:
Displays the software version information.
Exit:
Exits the PtG Converter-Lite.
PPT conversion button:
Starts the conversion from the PPT file to the
PtG file.
2. Click the PPT conversion button.
The file selection screen appears.
3. Select the PPT file you want to convert, and click
[Open].
name appears.
4. Set the file destination and the name.
The converted file is stored in the same folder as
original file by default.
The name of the converted file is the same as
original file's by default.
5. Click [OK] to start conversion.
6. When the conversion has been completed, click
[OK].
PPT conversion button
Important:
display can be converted. However, the followings
are not supported.
repeat setting
a single movement
setting
Connection
Connect a USB device to the USB-A terminal on the
projector.
AUDIO
IN-1
AUDIO OUT
AUDIO
IN-2
Important:
with USB 2.0.
Do not use a USB hub for the connection.
Performing the PC Less Presentation
Selecting a PC Less Presentation input
1. Press the VIEWER button on the remote control or
the COMPUTER button on the projector.
button, the input source is switched between
Computer1, Computer2, HDMI, LAN Display,
USB Display and PC Less Presentation.
selected, the Presentation to Go screen
appears.
EN-43
COMPUTER / COMPONENT VIDEO
AUDIO IN-3L S-VIDEO SERIAL
USB-A
USB-B
IN-1
AUDIO IN-3R
IN-2
MONITOR OUT
VIDEO
AC IN
USB device
the COMPUTER
PC Less Presentation input is
LAN
To USB-A
terminal