Table of Contents
Advertisement
Network settings (continued)
Subnet Mask settings
1. Display the IP Config menu.
2. Press the
or
button to select Subnet Mask.
Subnet Mask
3. Press the ENTER button.
Subnet Mask
4. Press the
or
button to select the numeric
value.
5. Press the
or
button to select the octet.
Subnet Mask
6. Press the ENTER button.
255. However, set the numeric value for the final
octet within the range from 0 to 254.
Default Gateway settings
1. Display the IP Config menu.
2. Press the
or
button to select Default Gateway.
Default Gateway
3. Press the ENTER button.
Default Gateway
4. Press the
or
button to select the numeric
value.
5. Press the
or
button to select the octet.
Default Gateway
6. Press the ENTER button.
255. However, set the numeric value for the final
octet within the range from 1 to 254.
Setting or clearing DHCP Function
1. Display the IP Config menu.
2. Press the
or
button to select DHCP Function.
DHCP Function
3. Press the
or
button select On or Off.
Address and End IP Address cannot be set.
If you want to set these settings, set DHCP
Function to On and perform the IP settings as
follows.
255
255
0
0
-
-
-
255
255
0
0
-
-
-
255
255
0
0
-
-
-
169
254
0
1
-
-
-
169
254
0
1
-
-
-
169
254
0
1
-
-
-
On
Start IP Address setting
1. Display the IP Config menu.
2. Press the
Start IP Address
3. Press the ENTER button.
Start IP Address
4. Press the
value.
5. Press the
Start IP Address
6. Press the ENTER button.
255. However, set the numeric value for the final
octet within the range from 2 to 254. Moreover,
set the numeric value larger than IP address in
the same subnet class.
End IP Address setting
1. Display the IP Config menu.
2. Press the
End IP Address
3. Press the ENTER button.
End IP Address
4. Press the
value.
5. Press the
End IP Address
6. Press the ENTER button.
255. However, set the numeric value for the final
octet within the range from 3 to 254. Moreover,
set the numeric value larger than Start IP
address in the same subnet class.
IP Config Setup setting
1. Display the IP Config menu.
2. Press the
IP Config Setup
3. Press the ENTER button.
4. If the ENTER button is pressed again, the IP Config
setting will be reflected.
EN-35
or
button to select Start IP Address.
169 - 254 - 0
169 - 254 - 0
or
button to select the numeric
or
button to select the octet.
169 - 254 - 0
or
button to select End IP Address.
169
254
0
-
-
169
254
0
-
-
or
button to select the numeric
or
button to select the octet.
169
254
0
-
-
or
button to select IP Config Setup.
OK
- 221
- 221
- 221
224
-
224
-
224
-
Hide quick links:
Advertisement
Table of Contents
