Table of Contents
Advertisement
Operating the appliance
en
Notes
If there is a high water level, high
■
temperature or if the drum is
rotating, the door remains locked
for safety reasons and reloading is
not possible.
If the following is indicated on the
display panel:
Õ is lit ~ Reloading is not
possible. To continue the
programme, select the
(Start/Reload) button.
Π
ύ
α
ση
Do not open the door until the door
■
lock symbol Õ goes out.
Do not leave door open for
■
a prolonged period – water could
run out of the laundry.
The reloading function cannot be
■
activated during the drying phase.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
Select
1.
Έναρξη/Παύση (Start/
A
Reload).
Select another programme. If
2.
required, adjust the default settings
and/or select additional functions.
Select
3.
Έναρξη/Παύση (Start/
A
Reload). The new programme starts
from the beginning.
Interrupting or ending the
programme
For programmes at high temperature:
Select
1.
Έναρξη/Παύση (Start/
A
Reload).
To cool down laundry: Select
2.
Ξέβγαλμα(Rinse).
Select
3.
Έναρξη/Παύση (Start/
A
Reload).
For programmes at low temperature:
Select
1.
Έναρξη/Παύση (Start/
A
Reload).
Select Στύψιμο/Άντληση
2.
νερού(Spin/Drain).
18
A
Έναρξη/
Select
3.
Έναρξη/Παύση (Start/
A
Reload).
For drying programmes:
Select Εντατικό Στέγνωμα
1.
(Intensive Dry) 5 or Απαλό
Στέγνωμα (Gentle Dry) ‰.
Touch button Š Στέγνωμα(Dry) and
2.
set drying time to 15 minutes.
Select
3.
Έναρξη/Παύση (Start/
A
Reload).
End of the programme
End or – – – – (Rinse stop = without
final drain/spin cycle) is indicated in the
display and acoustic signal sounds.
Setting the signal ~ Page 27
If – – – – (Rinse stop = without final
drain/spin cycle) was selected, press
Έναρξη/Παύση (Start/Reload)
A
button to start the final drain/spin cycle.
Notes
The programme continues by
■
pumping out the water and spinning
the laundry (the standard spin speed
can be changed beforehand).
If only the water is to be pumped out,
■
approx. 1 minute after the
programme starts, touch the
Έναρξη/Παύση (Start/Reload)
button before the spin cycle starts.
The programme is interrupted and
the door lock is released. The
laundry can be removed.
If Hot flashes in the display before
■
the drying programme ends, the
temperature in the drum is high. The
programme for cooling the drum
runs until the temperature in the
drum has dropped.
A
Advertisement
Table of Contents
