Smeg Classica SO4302S3X Manual page 22

Table of Contents

Advertisement

6. Turn the temperature knob to set the
defrosting time (from 1 minute to 13 hours)
(e.g. "1:30").
7. Press the
button to start the function.
At the end,
and a beep is activated.
8. Turn the function knob to position 0 to exit
the function.
9. Below is a reference table with defrosting
times by type of food.
Type
Weight (kg)
Meats
Fish
Bread
Desserts
PROVING
This function is particularly suitable for
proving dough.
1. After entering the special functions menu,
press the
button until the
function is selected.
If the indoor temperature is higher than
expected, the function is not activated
and every time the
the appliance makes a beep.
Let the appliance cool down before
activating the function.
2. Open the door.
3. Position the dough to prove on the second
level.
4. Close the door.
91477A653/B
is displayed and flashes
Time
0.5
1h 45m
0.4
0h 40m
0.3
0h 20m
1.0
0h 45m
button is pressed
5. Press the
button to confirm.
Turn the temperature knob to change
the temperature value (from 25°C to
40°C)
6. Press the
button to start the function.
7. Turn the function knob to position 0 to exit
the function.
For successful proving, a container of
water should be placed in the bottom of
the oven.
a
SABBATH
This function results in the appliance
operating in a particular way:
• Cooking can proceed indefinitely, it is not
possible to set any cooking duration.
• No pre-heating will be performed.
• The cooking temperature which can be
selected varies between 60-150°C.
• Oven light disabled, any operation such as
opening the door (where present) or manual
activation with the knob will not activate the
light.
• The internal fan remains turned off.
• Knob illumination and audible prompts
remain disabled.
After activating the Sabbath mode the
settings cannot be altered. Any action
on the knobs and/or on the display
button will produce no effect; only the
function knob remains active to allow
you to return to the main menu.
1. After entering the special functions menu,
press the
button until the
function is selected.
2. Press the
button to confirm.
USE - 73

Advertisement

Table of Contents
loading

Table of Contents