Panasonic LUMIX DC-G95D Owner's Manual For Advanced Features page 50

2. Getting Started/Basic Operations
• With [Fn Button Set] in the [Custom] ([Operation]) menu, you can assign [LVF/Monitor Disp.
Style] to a Fn button.
Each time you press the assigned Fn button, the display style of the monitor or viewfinder
([ ]/[ ]), whichever is currently in use, will change.
• If no operation is performed, the information on the screen will gradually become darker after
approximately 10 seconds has passed, and will no longer be displayed after approximately
1 minute has passed.
Pressing the [DISP.] button or touching the monitor will make the display reappear.
This operation is to prevent screen burn-in and is not a malfunction.
About the tilt sensor display
∫
With the tilt sensor displayed, it is easy to correct the tilt of the camera etc.

A Horizontal direction:
B Vertical direction:
• When the camera is tilted very little or not at all, the level gauge will turn green.
• Even after correcting the tilt, there may still be an error of approximately n1°.
• When tilted significantly upwards or downwards to record, the tilt sensor display may not be
displayed correctly, and the Direction Detection Function may not work correctly.
Correcting tilt to the left
Correcting downward tilt
50
