Required Tools - Bakcou Mule Assembly

1.
For further assistance, go online for helpful instructional videos at bakcou.com
Bakcou Mule Assembly
Terminology:
Make certain to pay attention to all bold italicized text
• Front Fork
• Quick Release

REQUIRED TOOLS:

• Thru Axle
We recommend using medium grade Loctite on any bolts
• Handle Bars
that seem to loosen while riding
• Stem
Cutting Pliers (to cut box poly strapping and
• Front Fender
heavy bike banding)
• Rear Fender
Scissors (to remove bubble wrap)
• Pedal CR-L
• Pedal CR-R
Allen wrenches (4mm, 5mm, 6mm included in box)
Wrenches (10mm, 15mm included in box)
Approximate Assembly Time: 20 - 30 minutes
UNBOXING
1. Cut banding straps from exterior of box and open box.
2. Remove "Tool Kit" box containing pedals, headlight, battery
charger, and hardware from box.
3. Remove bike from box. (If necessary, lay box on side and
slide out, or use two people to lift out)
4. Cut banding straps to release the front tire from the frame of the
bike. (Use caution in cutting banding straps, paying particular
attention to brake, derailleur, and all other cables on bike)
5. Cut banding straps to remove front and rear fenders from the
front tire. (Rear fender may already be assembled on bike)
6. Cut banding straps to release handle bars from the frame of the
bike. (Avoid letting handlebars hang for extended periods and
thus putting stress on cables. Make certain cable connections
have not pulled apart during this step, or in shipping)
7. Remove remaining bubble wrap, foam, and shipping
materials needed to protect the bike during assembly. Note:
Make certain to remove plastic (if present) from both sides
of the motor to allow for ventilation while operating.
BAKCOU.COM