Advertisement
7.
For further assistance, go online for helpful instructional videos at bakcou.com
PUMP UP TIRES
21. Using a schrader valve bike pump, inflate the tires to
around 20 psi.
INSTALL BATTERY
23. Key is not needed to install battery; Simply place the bottom
of the battery into lower slot and firmly push top of battery into
upper slot. Make sure battery is locked firmly into place prior to
riding, as a loose battery may cause inadvertent loss of power,
or the battery may fall out of chamber and become damaged.
After reinserting, check the battery attachment by pulling out
and up on the handle to ensure it is securely fastened.
READ BEFORE USE
adjustments can include rotating locking
handle grips, moving/rotating brake levers,
throttle, and shifters. These adjustments
24. Make sure to check all nuts and bolts to
are easily performed. However, feel free
ensure they have not loosened during
to contact us via email or phone with
shipping.
any questions.
25. Battery typically has a partial charge straight
30. Note: A Suspension Adjustment video and
from the box. Riding the bike straight out
Display Use video can each be viewed
of the box will not impact battery life or
under "Support" on the Bakcou website.
compromise the battery in any way.
Note: Located at the bottom of some
right front forks is a blue knob called
26. Battery can be charged while on the bike or it
a shock dampener. This knob is used
can be removed and charged off of the bike.
to control the rebound speed of the
fork. Knob can be twisted clockwise
27. Keys are only used to remove battery from
to close or counter-clockwise to open,
bike. Simply insert key into lock and turn,
thus allowing more or less air flow to
while pulling out and up on battery handle
increase/decrease rebound speed. Make
to remove battery.
certain to tighten the screw inside the
dampener knob and we recommend
28. To re-insert battery, key is not needed: simply
using Loctite on the threads to keep
place bottom of battery into lower slot and
screw in place. After tightening screw
firmly push top of battery into upper slot.
tighten (clockwise) the dampener knob
(Note: make sure battery is locked firmly
and then back off 1 ½ turns. After
into place prior to riding as a loose battery
getting used to your Mule's suspension,
may cause inadvertent loss of power, or
adjust accordingly.
battery may fall out of chamber and become
damaged. After reinserting, check battery
31. It may be necessary to adjust your
attachment by pulling out and up on handle
derailleur prior to first use. Refer to our
to ensure it is securely fastened)
Troubleshooting Shifting Problems video on
the Bakcou website for support adjusting
29. Assembly is now complete, however,
your derailleur, or visit your local bike shop
minor adjustments are often necessary
for assistance.
to precisely fit ebike to rider. These
32. Two "green" rolls of puncture proof tire liners
may be located in the bike box or in the tool
kit box. The liner goes in between the tube
and the tire. If the liners are not in the box
or tool kit box then they were installed at
the factory. Some riders prefer to use these
liners as well as a tube sealant such as Flat
Out for added protection from punctures.
The liner will add some weight to the tire
and does affect the flexibility of the rubber
thus slightly changing how the tire rolls
across some terrain. We strongly encourage
using the puncture proof liner when riding
in areas with heavy "goat heads" or other
tube puncturing thorns. (Bakcou YouTube
instructional video available online)
33. Regular and routine maintenance of your
ebike is not only recommended, but highly
essential to ensure proper function, safety,
and longevity of your ebike.
See owners manual for further instruction.
34. Always wear a helmet and other
protective gear while riding.
35. Always know and observe traffic and trail
laws and regulations.
BAKCOU.COM
Advertisement
