Required Tools - Bakcou Mule Assembly

Bakcou Mule Assembly
Make certain to pay attention to all bold italicized text

REQUIRED TOOLS:

• Cutting Pliers (to cut box poly strapping and
heavy bike banding)
• Scissors (to remove bubble wrap)
• Allen wrenches (4mm, 5mm, 6mm included in box)
• Wrenches (10mm, 15mm included in box)
• Approximate Assembly Time: 20 - 30 minutes
UNBOXING
1. Cut banding straps from exterior of box and open box.
2. Remove "Tool Kit" box containing pedals, battery
charger, and hardware from box.
3. Remove bike from box. (If necessary, lay box on side and
slide out, or use two people to lift out)
4. Cut banding straps to release the front tire from the frame
of the bike. (Use caution in cutting banding straps, paying
particular attention to brake, derailleur, and all other cables
on bike)
5. Cut banding straps to remove quick-release axle from
front wheel.
6. Cut banding straps to release handle bars from the frame
of the bike. (Avoid letting handlebars hang for extended
periods and thus putting stress on cables. Make certain
cable connections have not pulled apart during this step, or
in shipping.)
7. Remove remaining bubble wrap, foam and shipping
materials needed to protect the bike during shipment. Note:
Make certain to remove plastic (if present) from both sides
of the motor to allow for ventilation while operating.
E L E V A T E Y O U R L I F E
BAKCOU.COM