Product-Specific Information; Intended Use - TESTO 110 Instruction Manual

Product-specific information


Do not carry out measurements on live components.

Do not expose handles and feed lines to temperatures in excess of 70°C
unless they are expressly approved for higher temperatures. Temperature
specifications on probes/sensors refer only to the measuring range of the
sensor system.

Only open the measuring instrument if this is expressly described in the
documentation for the purposes of maintenance or servicing.

Intended use

The testo 110 is a compact measuring instrument for measuring temperatures.
The product is designed for the following tasks/areas:

Food sector

Laboratory sector
The product should not be used in the following areas:

In potentially explosive atmospheres

For diagnostic measurements in the medical field
The following product components are designed for continuous contact
with foodstuffs in accordance with Regulation (EC) 1935/2004:
from the tip of the measuring probe up to 1 cm before the probe handle
or the plastic housing. If provided, the information about penetration
depths in the instruction manual or the mark(s) on the measuring probe
should be noted.
3 Product-specific information
5