10.7. Disassembly of Panel P.C.B.
· Follow (Step 1) to (Step 3) of Item 10.3.
· Follow (Step 1) to (Step 4) of Item 10.4.
· Follow (Step 1) to (Step 6) of Item 10.5.
· Disassembly of Panel Angle
Step 1 Remove 2 screws.
Step 2 Remove the panel angle.
· Disassembly of Mecha Holder
Step 3 Remove 2 screws.
Step 4 Remove the USB earth part & mecha holder.
· Disassembly of Panel P.C.B.
Step 5 Remove 1 screw from Panel P.C.B.
Step 6 Release the hook and remove Panel P.C.B.
10.8. Disassembly of USB P.C.B.
· Follow (Step 1) to (Step 3) of Item 10.3.
· Follow (Step 1) to (Step 4) of Item 10.4.
· Follow (Step 1) to (Step 6) of Item 10.5.
· Follow (Step 1) to (Step 6) of Item 10.7.
Step 1 Remove USB P.C.B. from the front panel.
10.9. Disassembly of Scart P.C.B.
· Follow (Step 1) to (Step 3) of Item 10.3.
Step 1 Remove 2 screws from the rear panel.
Step 2 Detach FFC cable from the connector (CN2008) on
Main P.C.B.
Step 3 Remove Scart P.C.B.
43
SA-PT550E / SA-PT550EB / SA-PT550EG