Right Leg - MD SPORTS 18402 Assembly Instructions Manual

1. Find a clean, level place to begin the assembly of your Air Hockey Table. The table will be assembled upside
down and then turned over on its legs once the assembly completed. This game table is heavy, and tuning it
over will require at least four strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts identifier
below. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work
surface.
FIG.1 LEG ASSEMBLY
3. Attach the Leg Support Board (#3) between a Right Leg - A (#1) and a Right Leg - B (#2) using six Screws (#15)
per Leg Support Board. Attach the Leg Support Board (#3) between a Left Leg - A (#7) and a Left Leg - B (#13)
using six Screws (#15) per Leg Support Board. See FIG.1A.
4. Attach the Leg Inside Panel (#5) to between the Leg A (#1 or #7) and the Leg B (#2 or #13) using four Screws
(#15) per Leg Inside Panel. See Fig. 1B.
5. Slide the Leg Corner (#4) to the groove of the Leg (FIG.1A assembled) using four Screws (#17). See FIG.1C.
and FIG.1D(Next Page).

Right Leg

15
2
FIG.1B
15
5
ASSEMBLY INSTRUCTIONS
3
1
3
13
FIG.1A
15
15
7
FIG.1
FIG.1C
5
Left Leg
3
15
13
4