MD SPORTS 18402 Assembly Instructions Manual page 10

FIG.5 CORNER AND PUCK CATCHER ASSEMBLY
14. Attach the Apron Corner (#23) between one Side Apron (#8) and one End Apron (#9 or #10) using six
Screws (#17) per Apron Corner. See FIG. 5.
15. Attach the Puck Catcher (#27) to the End Apron - A (#9) using two Screws (#17).
16. Repeat the steps above for the other Apron Corners and Puck Catcher.
Note: Make sure that all connections are tight.
23
40
17. Lift the table assembly from the floor with four strong adults, turn it over, and set table on its legs in the location
where you play. Go back and make sure that all connections are tight.
Note:
thickness (37, 38 or 39) at the bottom of the legs to
have the table stable well on a level place
where you will play.
CAUTION: Four strong adults are recommended to turn the table over as shown.
1. Lift the table off the ground.
2. Turn the table over.
3. Place it on all four feet at the same time on the ground.
FIG.5
10
23
23
17
9
37/38/39
HOLD TABLE
9
17
27
DO NOT LEAN THE
CABINET
DO NOT
TABLE ON ITS LEGS!
HOLD THE
LEGS