Advertisement
36
37
TABLE TENNIS PADDLE
2 PIECES
ASSEMBLY INSTRUCTIONS
1. Find a clean, level place to begin the assembly of your Table Tennis Table. The table will be assembled upside down
and then turned over. This is a heavy game and tuning it over will require at least two strong adults.
2. Remove all of the parts from box and verify that you have all of the listed parts as shown on the Parts List.
Carefully cut or tear the four carton corners so that the bottom of the box can act as your workarea.
FIG.1
3. Place the Right Table Surface (#1) and Left Table Surface (#2) with the painted surface facing down on a flat surface.
4. Connect together using three Bracket (#9) using twelve Screws (#18). See Fig.1A.
5. Repeat the above steps for another Table Surface.
6. Attach the Safety Strap (#24) using three Screws (#18).
FIG. 1
18
24
1
1
9
Note:
Align the inside seams of
each sections so that
pre-drilled holes line up
across from each other.
CONTROL BOX
1 PIECE
2
24
18
2
FIG. 1A
4
1
18
9
Advertisement
