Advertisement
FIG.6
22. Before turning the table over, make sure to push the Curved Inner Leg (#6) towards the center of the table in order
to engage the stop. NOTE: Two adults are required to turn this table over
23. One person should stand at each center of the table and turn the table over completely so that it rests on its legs.
24. Standing at the sides of the table, place the two table halves so they are inches apart.
NOTE: Be careful that you do not push either half backwards as this may cause the legs to fold!
25. Attach the Plastic Leg Panel and Frame (#21) to the opposite table half using two Bolts (#11) and two Washers
(#4).See FIG. 6. Now go back and tighten all the connections.
B. FOLD LEGS AND
C. LIFT TABLE AND
TABLE HALVES AND
TURN IN THE AIR
A. TURN TABLE
LOCK IN PLACE
ON ITS SIDE
FIG. 6
Note: Please leave 10mm distance
between table centers.
11
D. DO NOT LEAN
E. SET TABLE DOWN
TABLE ON ITS LEGS!
EVENLY ON ALL
WHEELS, TO PREVENT
BREAKING LEGS
E
D
11
4
Caution:
Two strong adults are recommended to
turn the table over as shown.
9
Advertisement
