System Components, Tools And Equipment; What Is Required For Mounting - novotegra Green roof East-west Mounting Instructions

4 System components, tools and equipment

4.1 What is required for mounting

Figure Tool
* The components vary depending on the requirements of the roof, the structural analysis and the choice of
components and may deviate from the images above.
Änderungen vorbehalten. Abbildungen sind beispielhaft und können vom Original abweichen.
V4.2.1 – März 2022/TP,
Copyright novotegra GmbH
Component*
Green roof substrate plate
Material: Recycled HDPE
Half green roof substrate plate
Material: Recycled HDPE
Green roof high module support:
Recycled plastic
Green roof low module support:
Recycled plastic
Green roof module support
6 x 80 mm mounting screw
material: Stainless steel
Tool: TX25
Green roof module support rail
Material: Aluminium
6.5 x 51 mm mounting screw for
green roof module support rail
Material: Stainless steel
Tool: Socket bit AF 8 mm
Rail connector set C47 S
Material: Aluminium
Tool: Socket bit AF 8 mm
Middle clamp set C
Material: Aluminium, cast aluminium
and stainless steel
Tool: Socket bit AF 8 mm
End clamp set C
Material: Aluminium, cast aluminium
and stainless steel
Tool: Socket bit AF 8 mm
Product group
Substrate layer /
protection layer
Substrate layer /
protection layer
module elevation
module elevation
fastening equipment
profile rails
fastening equipment
rail connector
Module elevation
Module elevation
5