E2S E2xS2FDC024 Instruction Manual

INSTRUCTION MANUAL
E2xS2R & E2xS2F Sounder
For use in Hazardous Locations
1) Product Table
E2xS2FDC024
E2xS2RDC024
E2xS2FDC048
E2xS2RDC048
E2xS2RAC115
E2xS2RAC115
E2xS2FAC230
E2xS2RAC230
The current levels shown above are for the tone resulting in max. current draw (tone 1 - 340Hz Continuous)
Table 1: Electrical Ratings.
Ensure the system power supply is capable of providing the maximum current required for all units. Review associated cable
size, length and quantity of units on each circuit.
2) Warnings
 DO NOT OPEN WHEN AN EXPLOSIVE
ATMOSPHERE IS PRESENT
 DO NOT OPEN WHEN ENERGISED
 POTENTIAL ELECTROSTATIC CHARGING
HAZARD - CLEAN ONLY WITH A DAMP
CLOTH
 HIGH VOLTAGE SHOCK HAZARD. WAIT 5
MINUTES AFTER REMOVING POWER
BEFORE OPENING THE ENCLOSURE
Avertissement:
 NE PAS OUVRIR UN PRESENCE
D'ATMOSPHERE EXPLOSIVE
 NE PAS OUVRIR ENERGIE
 DANGER POTENTIEL CHARGE
ÉLECTROSTATIQUE - NETTOYER
UNIQUEMENT AVEC UN CHIFFON HUMIDE
 HAUT TENSION, RISK DE CHOC.
ATTENDEZ 5 MINUTES APRES AVOIR
DEBRANCHE L'ALIMENTATION AVANT
D'OUVRIR LA BOITIER
European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH
Document No. D209-00-011-IS
E2xS2R
Model
Issue 1
E2xS2F
Nom. Voltage
24Vdc
48Vdc
115-120Vac
Nominal +/- 10%
50/60Hz
220-230Vac
Nominal +/- 10%
50/60Hz
3) Rating & Marking Information
3.1. ATEX / IECEx / UKEx certification
The E2xS2 alarm horn complies with the following standards:
EN IEC 60079-0:2018 / IEC60079-0:2017 (Ed 7):
Explosive Atmospheres - Equipment. General Requirements
EN IEC 60079-7:2015 +A1:2018 / IEC 60079-7:2018 (Ed. 5.1):
Explosive Atmospheres - Equipment Protection by Increased
Safety "e"
EN 60079-31:2014 / IEC 60079-31:2013 (Ed 2):
Explosive Atmospheres - Equipment Dust Ignition Protection
by Enclosure "t"
E2XS2 :
20-08-22
Voltage Range
10-30Vdc
38-58Vdc
Standards
Ratings
Ex ec IIC T4 Gc Ta -20°C to +55°C
Ex tc IIIC T85°C Dc Ta -20°C to +55°C
www.e2s.com
Operating
rms Current
280mA
215mA
142mA
76mA
Tel: +44 (0)208 743 8880
Sheet 1 of 5