Advertisement
4.
4.1 Transport information
The segment conveyor is packed and transported in a crate.
No force may be applied to output rail or separator during transport of the segment conveyor.
The segment conveyor centre is the centre of gravity.
The crate should be transported using a solid transport trolley.
They weight depends on the segment conveyor configuration and can be found in the transport
documentation.
Prior to transport, disconnect the segment conveyor from the power supply.
4.2 Safe installation information
WARNING
Assembly work may only be performed by specialists.
Make sure that the segment conveyor cannot be started by unauthorized persons prior to
performing setup work on the segment conveyor. Mount warning and information signs clearly
visible prior to work start!
Only use proper tools, especially spanners, which do fit and are not widened. Do not work with oily
hands. Accidents due to slipping!
Make sure, that disassembled protection devices are reinstalled prior to first restarting.
Test runs: Verify that no tools, screws, auxiliary material or items are within the effective range of
the segment conveyor.
4.3 Installation site
The segment conveyor should be installed on a solid, horizontal and flat base (plate, etc).
CAUTION
During installation of the segment conveyor, ensure that the segment conveyor is not
exposed to strong magnetic fields (e.g. welding equipment). Otherwise make sure,
respective shielding from the hazard location is planned.
Installation in explosion hazardous areas is prohibited.
Transport & assembly
- Segment conveyor-page 4.1
4.
Advertisement
