Advertisement
3.
3.1 Basic Construction
2
1 Parts container with lifting unit
2 Basic frame with protective cover
3 Output rail
4 Separator (optional)
5 Deflector (optional, without image)
The basic construction only refers to the base configuration. You can find the exact configuration of
your ordered segment conveyor in the enclosed spare parts list.
3.1.1 Deflector types (optional)
Using deflectors, the parts can be specifically distributed from a segment conveyor to up to four
processing machines. The deflectors are mechanically separated from the segment conveyor and
thus have the benefit that the deflectors can be installed at the most technically favourable position
of the main machine. The supply hose may have a maximum diameter of 25 mm (according to
deflector configuration). If no electrical and pneumatic al control terminal is delivered by the
manufacturer, the carrier must install the terminal of the segment conveyor.
2-way deflector
Main components
1
3- way deflector
- Segment conveyor-page 3.1
3
4
4- way deflector
3.
Advertisement
